Intelligent Gateway technology enables PC interfacing and NMEA data conversion The NGX-1 is an intelligent multi-function gateway, combining the power of our two previous generation products (NGT-1 and NGW-1) into one, cost effective, flexible product.Configure the NGX-1 to operate as an NMEA 2000.PC interface, or as a bi-directional NMEA 0183.NMEA 2000 conversion gateway.Full control and visibility of your vessel data using the NGX-1:- View all NMEA 2000 network data on Actisense NMEA Reader.The device supports every available PGN in the NMEA 2000 standard.- View converted NMEA 0183 data on Actisense NMEA Reader.The device sports the largest conversion library of any gateway.- Easily interface with a wide range of PC applications via the NGX-1, such as TimeZero (NMEA 2000) and OpenCPN (NMEA 0183).- Configure the Actisense EMU-1, NGW-1 and NGX-1 via Actisense Toolkit using an NGX-1.- Connect legacy NMEA 0183 instruments together with new NMEA 2000 networks, greatly reducing upgrade costs.Features:- Vital NMEA 2000 diagnostic tool.- USB version is fully isolated to prevent dangerous ground loops.- ISO version has OPTO-isolated input and ISO-Drive output for safely interfacing with RS232 or RS422.- Up to 230,400 baud data transfer rate.- Advanced configuration using Actisense Toolkit allows Tx / Rx lists and Tx rates to be set.- Supports Fast Heading at 10Hz.- Multiple diagnostic LEDs Benefits:- Allows all major PC Chartplotter applications to interface with the NMEA 2000 bus.- Provides a rule-enforcing firewall between the PC and the NMEA 2000 bus.- Powerful diagnosis of the NMEA 2000 network using the FREE NMEA Reader software provided.- Configure and flash-update Actisense products on the bus.- Upgrade NMEA 0183 equipment to NMEA 2000.- Allow NMEA 0183 devices to receive vital NMEA 2000 data.- Use the NMEA 2000 bus to multiplex several NMEA 0183 signals together.- Reliable, renowned bi-directional conversion engine.- Supports a wide range of conversions including AIS.- Easily configurable using Actisense Toolkit Use Case:Converting legacy equipment:- The most common scenario for an NGX is connecting legacy NMEA 0183 equipment, into modern NMEA 2000 systems.- A perfect example is a vessel with NMEA 0183 GPS, Wind and Depth sensors, but theres also an NMEA 2000 network with MFDs.Getting the NMEA 0183 data onto the MFD requires the data to be converted and output as NMEA 2000 PGNs.- The NGX will receive, convert and transmit NMEA 0183 and NMEA 2000 data bi-directionally.- Cost is the main benefit here, where an NGX costs only a fraction of an NMEA 2000 GPS for example.Save money, time and space by using an NGX and leave your existing legacy equipment in place.Connecting to a PC:- On-board computers running applications such as TimeZero are becoming more common.To get the data into these NMEA 2000 programs, an interface is required between the NMEA 2000 network and the PC.The NGX will transfer all data to/from an NMEA 2000 network and PC.- Many devices also require configuration on the network, which can be done via the Actisense NGX-1 (if the manufacturer specifies our gateway).Our products such as the EMU-1, NGW-1,NGX-1 are configured via Actisense Toolkit which can be done using an NGX-1.Specifications:Power Supply:- Supply Voltage (NMEA 2000 Port):9 to 30V DC.- Supply Current (NMEA 2000 Port):62mA Reviews There are no reviews yet. Be the first to review “Actisense NGX-1 ISO NMEA0183 to NMEA2000 Gateway” Cancel replyYour email address will not be published. Required fields are marked *Your rating * Rate… Perfect Good Average Not that bad Very poor Your review *Name * Email * Save my name, email, and website in this browser for the next time I comment.
